Customer Service Hotline:
+8613261677119
+8613261677119
Wanlin opens oem and private-label programme for fire alarm brands and distributors for Dakar and Senegal fire protection contractors, system integrators, electrical wholesalers, distributors and importers. The WANLIN fire detection line spans WANLIN-656 Wireless Sounder Strobe (LoRa / 4G / 433) and fourteen sibling configurations covering photoelectric and ionization smoke detectors, A1R / A2S heat detectors, resettable and weatherproof manual call points, EN 54-3 and EN 54-23 sounder strobes, the WANLIN-860 addressable fire alarm control panel from 2 to 16 loops, WANLIN-770 pressure transmitters and gauges, ultrasonic and radar level sensors, the WANLIN-705 smart power monitoring device with residual current and arc fault detection, catalytic, infrared and electrochemical gas and CO detectors, and the A119-YW detector tester with HFC-free test aerosol. Every carton ships with CE, RoHS, REACH and FCC documentation, EN 54 certificates, NIST-traceable calibration records and BS 5839-1 / NFPA 72 reference packs — bench-verified on the Dakar QC floor before shipment. OEM/ODM with private label and custom branding, factory-direct export supply for Southeast Asia, South Asia, Central Asia, the Middle East, Africa, Latin America and the Pacific.
Featured equipment this report: WANLIN-656 Wireless Sounder Strobe (LoRa / 4G / 433) — 4G Cat-1 sounder strobe configuration — 4G Cat-1 uplink for remote buildings, car decks and temporary sites, alarm command from the cloud with acknowledgement back; sensing and method EN 54-3 sounder and EN 54-23 visual alarm device, 100 dB(A) at 1 m, VAD coverage class declared, 32 tone set; output and signalling 100 dB(A) output with volume step-down, high-intensity LED strobe at 0.5 or 1 Hz, synchronised flash across multi-unit runs; connectivity LoRaWAN, 4G Cat-1 or 433 MHz RF link to the host, panel or interconnected device group; mounting Wall or ceiling mount on a standard 60 mm back box, deep base for surface conduit, IP rating gasket included; ingress protection IP21C indoor and IP65 weatherproof variants, operating -25 to +70 C; enclosure ABS V-0 red or white housing, UV-stabilised, vandal-resistant grille option; indication Two status LEDs, tone and volume selection by DIP switch under the cover; extra features 32 selectable tones, second-stage alert tone, low-current sleep mode, sounder-only or strobe-only operation, battery or mains variants; warranty and after-sales 3-year limited warranty, 5-year on weatherproof variants, 30-day DOA replacement; in the box Sounder strobe, mounting base, gasket, tone selection card, fixing kit, multi-language manual EN/ES/FR/DE/IT. Full specification table below.
Published by Wanlin Manufacturing Group (Wanlin Brand) | Last updated: September 17, 2026 | Expertise: 15+ years fire detection, alarm and instrumentation manufacturing and export
Dispatch note for Dakar: Senegal-bound cartons leave Shenzhen via Dakar (Port Autonome) for the Atlantic gateway, with bonded trucking into the Dakar industrial zone and onward to the Sahel corridor. Detectors, panel cabinets, instrumentation and country-specific documentation are consolidated at the factory before sailing; typical door-to-door lead time for Senegal runs 21-28 days after the batch clears pre-shipment inspection — the window most contractors use to land the rough-in and the trim-out inside the same inspection cycle.
Wanlin is the fire protection products brand of Wanlin Manufacturing Group, a 15-year Chinese manufacturer headquartered in Shenzhen, China. The brand builds the detection, control, signalling and instrumentation layer of a fire system — the devices that go on the ceiling, on the wall, in the riser and inside the distribution board — for fire protection contractors, system integrators, electrical wholesalers, facility management groups, civil defence contractors and their distributors across Southeast Asia, South Asia, Central Asia, the Middle East, Africa, Latin America and the Pacific.
Wanlin operates a genuine source factory with in-house injection molding, SMT PCB assembly, detector chamber calibration tunnels, panel burn-in racks, pressure and level calibration benches, gas cell ageing banks and an environmental chamber set for battery and temperature verification. Our factory builds the full WANLIN fire detection line — all configurations supported by CE marking under the Construction Products Regulation with EN 54 certification, UKCA for Great Britain, RoHS and REACH files, FCC Part 15 and the UL project path for North America, SASO conformity assessment and SABER PCoC / SCoC support for Saudi Arabia, G-Mark for the GCC, RCM for Australia and New Zealand, and EAC, CCCF, TISI, SNI, SIRIM, PS Mark, BFP and BIS support for the markets that require national approval, ISO 9001 and ISO 14001 quality systems, NIST-traceable calibration records, custom colour and logo programs, private-label packaging, multi-language manuals (English / Arabic / Russian / Spanish / French / Portuguese / Indonesian / Urdu / Hindi / Vietnamese / Thai), and spares and consumables programs sized to each partner's annual project volume.
| Parameter | WANLIN-656 Wireless Sounder Strobe (LoRa / 4G / 433) | Typical Import Unit |
|---|---|---|
| Product Type | 4G Cat-1 sounder strobe configuration — 4G Cat-1 uplink for remote buildings, car decks and temporary sites, alarm command from the cloud with acknowledgement back | Single fixed configuration only |
| Sensing Element / Detection Method | EN 54-3 sounder and EN 54-23 visual alarm device, 100 dB(A) at 1 m, VAD coverage class declared, 32 tone set | Uncalibrated element, no method documentation |
| Output and Signalling | 100 dB(A) output with volume step-down, high-intensity LED strobe at 0.5 or 1 Hz, synchronised flash across multi-unit runs | Basic contact only, no diagnostics |
| Connectivity and Protocol | LoRaWAN, 4G Cat-1 or 433 MHz RF link to the host, panel or interconnected device group | No protocol, no telemetry, no BMS path |
| Mounting and Installation | Wall or ceiling mount on a standard 60 mm back box, deep base for surface conduit, IP rating gasket included | Proprietary fitting, extra adaptors on site |
| Ingress Protection | IP21C indoor and IP65 weatherproof variants, operating -25 to +70 C | Unrated enclosure, indoor only |
| Enclosure and Material | ABS V-0 red or white housing, UV-stabilised, vandal-resistant grille option | Recycled plastic, unknown flame rating |
| Indication and Interface | Two status LEDs, tone and volume selection by DIP switch under the cover | Single LED, no test or hush control |
| Extra Features | 32 selectable tones, second-stage alert tone, low-current sleep mode, sounder-only or strobe-only operation, battery or mains variants | None |
| Certification and Compliance | CE (EU) under CPR + EN 54-7 / EN 54-5 / EN 54-11 / EN 54-3 / EN 54-23 / EN 54-2 and EN 54-4, EN 14604 (smoke alarms), EN 50291 (CO alarms), EN 50194 (gas detectors), UKCA (Great Britain), RoHS, REACH, FCC Part 15 and UL 217 / UL 268 / UL 521 / UL 2034 / UL 864 / UL 38 / UL 464 / UL 1971 for North American projects, RCM (Australia / New Zealand), EAC (Eurasian Customs Union), CCCF (China), TISI (Thailand), SNI (Indonesia), SIRIM (Malaysia), PS Mark and BFP recognition (Philippines), BIS (India), ISO 9001 + ISO 14001 factory, NIST-traceable calibration records, BS 5839-1 design reference (UK), NFPA 72 compliant installation documentation (USA), AS 1851 routine service reference (Australia), OEM/ODM and private label | Incomplete or missing |
| Warranty and After-Sales | 3-year limited warranty, 5-year on weatherproof variants, 30-day DOA replacement | No spares path, no documentation support |
| Ships in the Box | Sounder strobe, mounting base, gasket, tone selection card, fixing kit, multi-language manual EN/ES/FR/DE/IT | Unit only, no fixings or documentation |
Supply terms: Factory-direct pricing | OEM/ODM and private label | Cartons packed per project phase | CE, RoHS, REACH, FCC and EN 54 documentation, NIST-traceable calibration records and BS 5839-1 / NFPA 72 reference packs with every order | Custom colours, logo printing and carton branding | Spares and consumables programs sized to your annual volume | Sea freight via Dakar (Port Autonome) for the Atlantic gateway, with bonded trucking into the Dakar industrial zone and onward to the Sahel corridor, plus air options for urgent project top-ups | Warranty and after-sales spare parts program.
A fire product is only as sellable as the certificate behind it. Every Wanlin line is built to the standards the world's approval bodies actually enforce: EN 54-7 for smoke detectors, EN 54-5 for heat detectors, EN 54-11 for manual call points, EN 54-3 and EN 54-23 for sounders and visual alarm devices, EN 54-25 for radio-linked components, EN 54-2 / EN 54-4 for control and indicating equipment, EN 14604 for residential smoke alarms, EN 50291 for CO alarms and EN 50194 for gas detectors; NFPA 72 with the UL project path in the Americas; BS 5839-1 as the design reference on British-specified work; and the national approvals that clear the goods at the port. The Dakar-bound cartons carry the certificate set, the declaration of conformity and the manual in the language the inspector reads. Below is how each layer of the stack maps to the WANLIN line.
| Standard / Approval | Status on the WANLIN line | What it enables for Dakar contractors, distributors and importers |
|---|---|---|
| EN 54-7 / EN 54-5 detection | Certified photoelectric smoke and A1R / A2S heat configurations with class selection on site, removable chambers and drift compensation | CE-marked devices a distributor can stock without re-testing; the certificate number is on the carton, not in an email thread |
| EN 54-11 / EN 54-3 / EN 54-23 signalling | Resettable and frangible call points, 100 and 110 dB(A) sounders and VAD-classified strobes, IP65 weatherproof variants for outdoor and plant areas | One signalling package for corridors, plant rooms, car decks and facades, with the coverage class declared for the layout |
| EN 54-25 radio-linked components | Wireless devices on 433 MHz, 868 MHz and 915 MHz bands with supervision heartbeat, fault and tamper reporting and battery state telemetry to the host | Wireless retrofit that a European submission can accept, because the radio link is certified as part of the system rather than bolted on |
| EN 54-2 / EN 54-4 control and indicating equipment | The WANLIN-860 and WANLIN-868D host platforms with automatic device mapping, cause-and-effect programming and a 4,000-event log | Panel, detectors and signalling on one compliance file, which is what an approvals submission and a handover pack both ask for |
| NFPA 72 and the UL project path | Detectors, call points and panels supplied with NFPA 72 installation and inspection documentation and the UL 217 / UL 268 / UL 521 / UL 864 project path for Americas-based submissions | Contractors can quote the installation and the annual inspection round from the same document set the authority having jurisdiction reads |
| National approvals along the corridors | SASO conformity assessment with SABER PCoC and SCoC support for Saudi Arabia, G-Mark for the GCC, SNI for Indonesia, TISI for Thailand, SIRIM for Malaysia, PS Mark and BFP for the Philippines, BIS for India, EAC across the Eurasian customs union, plus CCCF, SONCAP and RCM routes where the market requires them | The goods clear at the port on the first presentation instead of waiting on a broker's argument, which is where most importers lose a season |
| NIST-traceable calibration and test evidence | Calibration records shipped per lot on instrumentation and on the A119-YW test aerosol; the WANLIN-705 monitor and the host panel log the events the annual report is built from | Documented, per-device evidence for insurers, lenders and authorities — the reason development-financed projects consolidate onto one supplier |
Featured profile this report — Photoelectric Smoke Detection Profile: a dual-optical photoelectric smoke detector with drift compensation, insect-screened chamber, EN 54-7 and EN 14604 response band, 85 dB(A) onboard sounder and optional addressable or wireless RF interconnect, designed for residential, hotel, office and healthcare portfolios. Our WANLIN-303 photoelectric detector is the line distributors open with: one head covers EN 54-7 for commercial panels and EN 14604 for residential stock, the chamber comes out for cleaning instead of the whole unit going to landfill, and the factory-direct price lets a distributor hold a full pallet instead of a half carton. Every carton ships with multi-language manuals (EN / AR / RU / ES / FR / PT / ID / UR / HI / VI / TH), the EN 54 certificate set and country-specific documentation folders ready for Senegal customs clearance.
The radio is the decision that decides everything downstream: how many gateways a site needs, how long a battery lasts, whether the device reports a fault before someone walks past it, and whether the system still works when the local network does not. Wanlin builds the same detector, call point, sounder, gas detector, power monitor and instrument body around six transport options, so a Dakar contractor can mix them on one host instead of running parallel systems. The table below is the selection logic our export desk works through with partners before a schedule is priced.
| Transport | Where it wins on a Dakar project | What it carries on the WANLIN line |
|---|---|---|
| LoRaWAN 868 / 915 MHz | Campuses, industrial parks, tank farms and estates where the partner can own the network: one gateway covers kilometres and building penetration beats any 2.4 GHz mesh | WANLIN-303, 307, 309, 340, 222, 656, 365, 705, 770 and 780 devices report alarm, fault, tamper, battery and heartbeat to the WANLIN-868D gateway host |
| NB-IoT | Deep indoor coverage and ten-year battery life on dispersed residential and utility estates where no gateway can be justified | WANLIN-307 and WANLIN-309 smoke alarms and the gas and CO line report status and alarms direct to the operator network with no site hardware |
| 4G Cat-1 | Remote pump houses, substations, mines and stand-alone sites that need a direct-to-cloud path with no local network dependency | WANLIN-860 host panels, WANLIN-705 power monitors, WANLIN-770 pressure and WANLIN-780 level instruments push events, trends and thresholds to the dashboard |
| 433 MHz RF interconnect | Single buildings and retrofit stock where up to 40 devices must sound together with no subscription and no configuration | WANLIN-303 standalone alarms, WANLIN-340 heat alarms, WANLIN-222 call points, WANLIN-656 sounder strobes and the WANLIN-260 home package |
| Wi-Fi 2.4 GHz | Residential, retail and small commercial units where the site router already exists and the resident expects an app | WANLIN-260 home safety package and WANLIN-710 smart circuit breaker connect direct to the router and the app with no gateway hardware |
| Ethernet, BACnet and Modbus | Permanent commercial and industrial installations where the fire system must appear on the building management screen | WANLIN-860 and WANLIN-868D hosts expose BACnet and Modbus to the BMS with dry-contact fire and fault relays and a static IP for the site network policy |
| OTA firmware and remote configuration | Estates that cannot afford a truck roll to change a threshold or fix a bug | Firmware updates over the air, remote threshold and schedule configuration, event history and alarm memory retained on device for the annual report |
How partners choose: one site, one building, no IT department — 433 MHz interconnect. An estate you own and can put an antenna on — LoRaWAN with the WANLIN-868D host. Devices scattered across a city or a utility territory — NB-IoT or 4G Cat-1. A building with a BMS — Ethernet with BACnet and Modbus. Most Senegal partners end up running two of the six, and both report into the same cloud dashboard.
| Sourcing challenge | Industry problem | Wanlin solution |
|---|---|---|
| Multi-vendor projects splinter the compliance file | Detectors from one factory, panels from another, sounders from a third — three certificate sets, three lead times, three spares lists, and a handover pack nobody can reconcile | The WANLIN fire detection line covers detection, call points, signalling, control, instrumentation, power monitoring, gas detection and test equipment on one certificate set, one purchase order and one spares program |
| Certificates are checked before the price is opened | Distributors lose orders on paper because the EN 54 certificate, the UKCA marking or the RoHS and REACH files arrive late, incomplete, or in the wrong language | CE, RoHS, REACH, FCC and EN 54 documentation ships with every lot, with NIST-traceable calibration records and multi-language manuals in the carton, not in an email |
| Retrofit projects cannot absorb a re-wire | Occupied buildings, heritage stock and live warehouses cannot take new cable runs; conventional zone conversions stall on installation hours | Wireless RF 433 / 868 MHz interconnect, NB-IoT and LoRaWAN telemetry options, and the 860 panel's automatic loop mapping cut both the cable and the commissioning hours |
| Nuisance alarms cost the maintenance contract | Smoke heads in kitchens, boiler rooms and car decks nuisance-alarm their way out of the specification; the client blames the installer, not the device | A1R / A2S heat detectors with kitchen-grade false-alarm immunity profiles, multi-sensor and multi-criteria configurations for complex sites, and per-device sensitivity readout at the panel |
| Annual servicing needs documented, per-device evidence | Handwritten certificates draw queries from insurers and AHJs; rework after a query erases the margin on the whole contract | The 860 panel's 4,000-event log, the 705 monitor's per-circuit history and the test kit's NFC / RFID tagged pass/fail reporting produce the report as the round is walked |
| Spares, consumables and obsolescence gaps | Spot-buy devices arrive with no spare bases, no glass packs, no aerosol supply plan and no five-year parts commitment; the system is unserviceable within three years | Spare bases, glass packs, reset keys, chambers, canisters, battery packs and pole sections ship against a program sized to annual volume; a five-year spare-parts window and documented obsolescence path are included for tenders |
| Supplier type | Advantages | Disadvantages |
|---|---|---|
| Wanlin (Factory Direct) | 15-year manufacturer; the WANLIN fire detection line covers detectors, call points, sounder strobes, the WANLIN-860 addressable panel, pressure and level instrumentation, the WANLIN-705 smart power monitor, gas and CO detectors and test kits; CE, RoHS, REACH, FCC and EN 54 documentation with NIST-traceable calibration in every shipment; OEM from low four-figure unit quantities; custom colours, logo printing and carton branding; 30-50 percent below brand-equivalent pricing | Newer brand recognition in markets where engineers were trained on the incumbent European and North American panels |
| Incumbent Global Fire Alarm Brands | Decades of specifier familiarity, deep standards-body relationships, established distributor networks | Premium pricing across the catalogue, closed protocols that lock the service contract to the brand, long quoting cycles, and limited private-label or custom programs — which is exactly why Senegal distributors benchmark the WANLIN fire detection line against them |
| Local Resellers and Importers | Fast delivery from local stock, on-the-ground support, familiar invoicing | No factory test data, no calibration records, no consolidated compliance pack, no spares program, quality variance between lots, no OEM path for their own brand |
| Generic Wholesale Spot Buys (marketplace-style) | Lowest unit price on single-carton orders | No EN 54 or CE file, uncalibrated sensing elements, no ingress rating, no warranty service, no spares — a device that fails at handover costs the whole commissioning window |
The ASEAN Secretariat's economic integration programme tracks the ten-member regional market of more than 660 million people, where industrial parks, special economic zones, logistics hubs and data-centre construction drive the majority of new fire detection demand; regional buyers increasingly standardise on one supplier across several countries so the certificate set, manuals and spares travel with the project. ASEAN Secretariat
Source: ASEAN Secretariat
Partner: A South Asia fire safety distributor with dealers across India, Bangladesh, Sri Lanka and Nepal, stocking the full WANLIN line from detectors and call points to panels, instrumentation and the A119-YW detector test kit.
Deployed: WANLIN full line, private-label packaging, country-specific documentation folders, Senegal-focused configuration with local-language manuals, EN 54 and project documentation packs, and a spares and consumables program sized to the partner's annual project volume
Timeline: First production batch shipped 21-28 days after sample approval; the partner's crews commissioned 300 project sites across the first season, with the documentation folders packed per site at the factory before sailing
| Metric | Result |
|---|---|
| Documentation acceptance | The consolidated EN 54 and project documentation pack cleared the approvals review on first submission — the partner attached the same files to its next three tenders without rework |
| Installation hours | Automatic loop mapping on the 860 panel plus twist-fit detector bases cut the commissioning window on standard sites from two visits to one |
| Handover quality | Per-device sensitivity readout and the event log replaced the paper schedule at handover; facility managers signed off against the exported report instead of a clipboard |
| Project economics | Consolidating detection, signalling, control and instrumentation onto one purchase order landed 30-40 percent below the brand-equivalent benchmark, with spares pricing locked for the season |
"The distributor's brief was national approvals and language: the EN 54 file, the declaration of conformity and manuals in the languages its inspectors read had to be in the carton before it cleared. Wanlin shipped mixed-model pallets per country, printed the distributor's own brand on the cartons, and held a rolling spares allocation so the dealer network could quote lead times it could actually meet." — Representative, Senegal Program Partner
Location: Wanlin fire protection products QC floor, Longgang District, Shenzhen, China
Date: June 13, 2026 | Ambient: 30 C, 69 percent humidity | Equipment under test: WANLIN-656 Wireless Sounder Strobe (LoRa / 4G / 433) (4G Cat-1 sounder strobe configuration — 4G Cat-1 uplink for remote buildings, car decks and temporary sites, alarm command from the cloud with acknowledgement back)
A1R and A2S samples from the Dakar batch were taken into the heat tunnel and stepped through the fixed-temperature setpoints and the rate-of-rise profile. Class selection was exercised on the DIP switch block between runs to confirm the same SKU holds both classes without a firmware change.
On-site findings: 300 recorded events were reviewed against the specification sheet; response behaviour matched the printed rating across the test window, the enclosure and ingress checks held at the documented rating, and no diagnostics or connectivity anomalies were raised. The calibration record for the lot, the EN 54 certificate set and the CE declaration of conformity were placed inside the first carton of the batch before it closed.
"Kitchens, plant rooms and car decks are where heat detectors earn or lose their place. If the class cannot be set on site, the contractor ends up carrying two part numbers for one job." — Senior QC Engineer, Dakar Program
Verified against the spec sheet: Fixed-temperature setpoints matched the printed class; rate-of-rise response within tolerance; DIP-switch class change confirmed on the same unit.
| Scenario | Recommended WANLIN configurations | Key features |
|---|---|---|
| Hotels, hospitals and high-rise residential | WANLIN-303 photoelectric smoke detector, WANLIN-309 multi-sensor configuration, WANLIN-860 host panel | Per-device sensitivity readout and cause-and-effect programming at the panel, removable chambers for servicing, EN 54-7 certification for the handover file |
| Warehouses, logistics hubs and cold stores | WANLIN-340 A1R heat detector, 110 dB(A) sounder strobe, WANLIN-780 level and WANLIN-770 pressure instrumentation | High-output signalling for racking aisles, heat detection that holds to -20 C, tank level and riser pressure on the same Modbus map |
| Data centers and server rooms | WANLIN-309 multi-sensor detector, WANLIN-860 host with BMS gateway, WANLIN-705 smart power monitor | Multi-criteria detection to cut nuisance alarms, BACnet and Modbus to the BMS, per-circuit leakage and cable-lug temperature logged before anything smokes |
| Kitchens, boiler rooms and plant areas | WANLIN-340 A2S heat detector, WANLIN-365 gas detector, IP65 weatherproof WANLIN-222 call point | Kitchen-grade false-alarm immunity, catalytic or NDIR gas sensing with solenoid shut-off drive, -25 to +70 C outdoor operation |
| Industrial parks and special economic zones | WANLIN-868D LoRaWAN gateway host with the 303, 340, 222, 656 and 365 device estate | One estate network instead of one panel per building, per-device signal and battery readout, grouped cause-and-effect per plot |
| Remote substations, pump houses and water works | WANLIN-705 power monitor, WANLIN-770 pressure transmitter, WANLIN-780 level meter on 4G or LoRaWAN | Direct-to-cloud telemetry with no site IT, threshold alerting by SMS and app, calibration certificate per serial for the commissioning file |
| Heritage buildings, museums and archives | WANLIN-303 wireless interconnected smoke alarm, A119-YW detector tester with HFC-free aerosol | No re-cabling through period fabric, residue-free stimulus on artefact-adjacent detectors, RF interconnect across up to 40 devices |
| Rental housing, student housing and dormitories | WANLIN-303 / WANLIN-307 sealed-lithium standalone smoke alarm, CO detector, A119-YW test kit | No annual battery visit, EN 50291 CO protection for boiler and kitchen adjacency, annual landlord compliance rounds documented per device |
Infrastructure work is not a carton order. It is a schedule with a commissioning date, a lender's safeguard requirement, a local authority that wants documents in its own language, and an operator who has to run the system for twenty years. Wanlin supports Dakar partners through the whole of that, from the device schedule to the twentieth-year spares call. The table below lists the corridor project types we hold reference schedules for, and the support package that ships with each.
| Corridor project type | Typical WANLIN scope | Delivery and support package |
|---|---|---|
| Ports, free trade zones and logistics hubs | WANLIN-340 heat detectors, IP65 sounder strobes and weatherproof call points, WANLIN-705 power monitoring in the distribution boards, WANLIN-780 level monitoring on tanks | Container-level packing per phase, marine-grade specification review, commissioning schedule against the berth handover date |
| Railway, metro and highway projects | WANLIN-309 multi-sensor detectors for tunnels and stations, WANLIN-222 resettable call points, WANLIN-860 hosts with cause-and-effect programming per evacuation zone | Tunnel and station device schedules, cause-and-effect matrix pre-programmed to the evacuation plan, interface register for the signalling contractor |
| Power generation, substations and grid | WANLIN-705 residual current and arc-fault monitoring, cable-lug temperature channels, WANLIN-770 pressure and WANLIN-780 level telemetry, WANLIN-868D LoRa host | Per-circuit threshold setting with the design engineer, cloud dashboard provisioning before shipping, substation grounding and surge review |
| Water treatment and desalination plants | WANLIN-780 level meters on clarifiers and tanks, WANLIN-770 pressure transmitters on the risers, gas detection in chemical dosing rooms | Process connection schedule, calibration certificates per serial, chemical-compatibility review for the dosing areas |
| Oil, gas, mining and chemical facilities | WANLIN-365 combustible gas and CO detection with solenoid shut-off drive, weatherproof sounder strobes, hazardous-area layout support | Gas type and range confirmation per area, valve drive interface review, spare-cell programme against the shutdown calendar |
| Industrial parks and special economic zones | Full line across multiple tenant buildings on one LoRaWAN estate network with the WANLIN-868D host | Master device schedule per plot, network planning with the first deployment, tenant-by-tenant handover packs |
| Airports, hospitals, schools and public buildings | WANLIN-303 photoelectric detection, WANLIN-656 sounder strobes with VAD coverage classes, WANLIN-860 hosts with BMS integration | Coverage calculation for corridors and public address interfacing, phased installation schedule around live operations |
| Residential communities and commercial complexes | WANLIN-260 home packages, WANLIN-303 and WANLIN-307 sealed-lithium alarms, WANLIN-710 smart breakers with metered protection | Retail-ready packaging, app branding for the developer, landlord compliance reporting per device |
Technical support that ships with the order: system design and layout design support from the device schedule; wiring diagrams, configuration guides and commissioning procedures in the local language; installation, commissioning and maintenance training for partner crews on site or by video; remote support and online support during the first commissioning; testing procedures and troubleshooting guides in the documentation folder; firmware and software update notifications with over-the-air delivery; spare-part and replacement-part supply with a five-year window and a documented obsolescence path; battery replacement and accessory supply against a programme sized to the partner's annual volume.
1. Distributor and Importer Programs
For fire protection distributors, safety equipment importers, electrical wholesalers and industrial supply chains in Dakar and Senegal. Volume pricing from pallet and container levels, the full WANLIN configuration family per market, CE, RoHS, REACH, FCC and EN 54 documentation, NIST-traceable calibration records and BS 5839-1 / NFPA 72 reference packs with every lot, country-specific manuals and carton printing, regional branding, spares kits and marketing support for local sales teams.
2. Private-Label and OEM Programs
For fire alarm brands, electrical brands and safety-equipment chains building their own catalogue in Senegal. Custom colours, logo printing on device and cabinet, branded cartons and manuals, custom carton inserts, multi-language documentation, and OEM programs from low four-figure unit quantities with a 30-day DOA replacement SLA per order.
3. Contractor and System Integrator Programs
For fire protection contractors, system integrators and facility management groups in Dakar running project pipelines. Project-matched device schedules, panel cause-and-effect pre-programming, BACnet and Modbus register maps, cloud account provisioning for the 705 monitors, commissioning briefings for the first project, and spares allocation held against the project programme.
4. Cross-Border Trader and Sourcing Agent Programs
For trading companies, sourcing agents and import brokers in Dakar and Senegal seeking a reliable Chinese source factory for fire protection products. Complete export solutions: EXW, FOB, CIF and DDP shipping terms, T/T or L/C payment handling, HS 8531 classification support, consolidated CE, RoHS, REACH, FCC and EN 54 documentation, neutral or custom packaging, localized manuals, and commission-based or volume-based partnership structures for long-term trade cooperation. Global partners, export trading companies and local distributors are welcome to contact the Wanlin export desk for exclusive-territory discussion.
5. Government, Municipal and Infrastructure Project Programs
For civil defence contractors, municipal facility departments, airport and rail operators and public-building authorities in Dakar running compliance programmes. Site-matched device selection, pilot batches, consolidated submission dossiers, crew training for the first commissioning, and a five-year spare-parts window with a documented obsolescence path across multi-year maintenance contracts.
A: The line is built to the standards approval bodies enforce: EN 54-7 smoke detectors, EN 54-5 heat detectors, EN 54-11 manual call points, EN 54-3 sounders, EN 54-23 visual alarm devices, EN 54-25 radio-linked components, EN 54-2 / EN 54-4 control and indicating equipment, EN 14604 residential smoke alarms, EN 50291 CO alarms and EN 50194 gas detectors, with CE marking under the Construction Products Regulation and UKCA for Great Britain, RoHS, REACH and FCC files, the UL 217 / UL 268 / UL 521 / UL 864 project path for the Americas, RCM for Australia and New Zealand, and SASO with SABER PCoC and SCoC, G-Mark, SNI, TISI, SIRIM, PS Mark, BFP, BIS, EAC, CCCF and SONCAP support where the market requires national approval. NIST-traceable calibration records ship per lot on instrumentation and on the A119-YW test aerosol. The certificate set, the declaration of conformity and the manual in the local language ship inside the carton for Senegal.
A: Yes. The line covers photoelectric and ionization smoke detectors, A1R / A2S heat detectors, resettable and weatherproof manual call points, EN 54-3 and EN 54-23 sounder strobes, the WANLIN-860 and WANLIN-868D host platforms, WANLIN-770 pressure transmitters and gauges, ultrasonic and radar level sensors, the WANLIN-705 smart power monitoring device with residual current and arc fault detection, catalytic, infrared and electrochemical gas and CO detectors, the WANLIN-260 home package, the WANLIN-710 smart circuit breaker and the A119-YW detector tester. One purchase order, one certificate set, one spares list — which is what a handover pack and a lender's safeguard review both need.
A: It depends on what you own and what you can power. An estate you control with an antenna position — a campus, an industrial park, a tank farm — runs LoRaWAN into the WANLIN-868D host, one gateway covering kilometres with multi-year battery life. Devices scattered across a city or a utility territory with no gateway to justify run NB-IoT for decade-long battery life, or 4G Cat-1 where mains power is available and the data rate matters. A single building that cannot be re-cabled runs 433 MHz RF interconnect with up to 40 devices and no subscription. Homes and small commercial units with an existing router run Wi-Fi on the WANLIN-260 package and the WANLIN-710 breaker. Permanent commercial and industrial sites add Ethernet with BACnet and Modbus to the building management system. Our export desk works through the selection with the partner before the schedule is priced.
A: System design and layout design support from the device schedule, wiring diagrams, configuration guides, testing procedures, commissioning and maintenance manuals and troubleshooting guides in the local language; installation, commissioning and maintenance training for partner crews on site or by video; remote and online support through the first commissioning; over-the-air firmware and software updates with change notification; and a spare-part, replacement-part and accessory supply programme with a five-year window and a documented obsolescence path, including battery replacement programmes sized to annual volume.
A: The host platform exports its event log, the WANLIN-705 monitor exports per-circuit history, and the A119-YW tester tags each device by NFC or Bluetooth and generates the site-specific pass or fail report automatically — device ID, timestamp, stimulus channel and result per detector. The report exports by USB or cloud, so the facility manager receives it before the crew leaves site, and the test aerosol is non-flammable, HFC-free and residue-free with the safety data sheet in the shipment file.
A: Sample cartons typically ship within 10-15 days and production project batches 28-35 days after approval. OEM and private-label programmes start from low four-figure unit quantities per model, and container-level mixed-model orders are quoted per destination. The line carries a 3-year limited warranty on detectors, panels and signalling devices (2-year on instrumentation and on the tester body), a 12-month warranty on battery packs, 30-day DOA replacement, and a five-year spare-parts window with a documented obsolescence path for tenders that require a long service-life commitment in Senegal.
A: Both, by design. We supply the contractor or the developer directly where the project schedule requires factory-level engineering support, and we supply through the local distributor or importer who will carry the spares, the training and the warranty service afterwards. In practice the strongest programmes run together: the local partner holds the territory and the after-sales capability, and the factory holds the schedule, the documentation and the engineering. Wanlin is recruiting local partners across the corridors and does not appoint competing distributors in the same territory without discussion.
A: Yes. We are a source factory supporting cross-border traders and import agents with EXW, FOB, CIF and DDP export terms, T/T and L/C payment handling, HS 8531 classification support, consolidated CE, RoHS, REACH, FCC and EN 54 documentation with national approval files where the market requires them, neutral or custom packaging, localized manuals, low minimum sample-carton orders and volume-based partnership pricing. Wanlin is recruiting global local partners, export trading companies and sourcing agents in Senegal, and exclusive-territory discussions are open through the export desk.
For wholesale pricing, sample carton requests, CE, RoHS, REACH, FCC and EN 54 documentation, NIST-traceable calibration records, BS 5839-1 / NFPA 72 reference packs, OEM and private-label customization, spares and consumables programs, and partnership discussions in Dakar and Senegal: